-40%
Adafruit Panel Mount Ethernet Extension Cable ADA 909
Adafruit Panel Mount Ethernet Extension Cable ADA 909

Adafruit Panel Mount Ethernet Extension Cable ADA 909

$ 5.53

Availability: 77 in stock
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • Features: Panel Mount
  • Return shipping will be paid by: Seller
  • Type: Extension Cable
  • Brand: Adafruit
  • Condition: New
  • Cable Length: 13 inch

    Description

    DESCRIPTION
    This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle Bone, Raspberry Pi, Arduino Ethernet into a box.
    The jack half has two mounting 'ears' with 4-40 screws installed, 1" inch / 25mm apart. The ears are flexible so the holes don't have to drilled very precisely. Can be used with box walls up to 0.25" wide. The screws can be put on from the back for 'reverse' mounting if the box thickness is a problem. Entire unit is approximately 13" long (10" cabling between jack and RJ45 Ethernet connector).
    TECHNICAL DETAILS
    Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
    CAT 5e
    24 AWG wires
    Approx. 13" long / 33 cm from tip to tip
    Approx 10" / 25 cm cabling from jack to connector
    Two 10mm 4-40 mounting screws, 24mm apart
    Plastic "boot" at Ethernet end is 20mm tall x 33mm wide (20mm where it is smaller behind the mounting flange) x 28mm deep